field test

PV Modules

A real world comparison between Mono, Poly, PERC and Dual PV Modules.

Realtime data
-- -- local time
Installation date: 09-03-2020


2500Wp --
Total solar yield: --


2500Wp --
Total solar yield: --


2500Wp --
Total solar yield: --


2500Wp --
Total solar yield: --

* This is a field test and the results are specific for this installation on this location, please research which is the best solution for your own situation as the results can be different based on environmental influences.

Need support?

Victron products are supported by a worldwide distributor network. 

Victron provides distributors with training and resources so that they can provide sales, support, servicing, design and warranty to end-users and installers.

Victron does not provide direct support to end-users and installers. The channel to support with your Victron products is with the place of purchase. If your distributor is unable to assist you, they can escalate the enquiry to a Victron Manager who will provide the necessary training.

Webshop Sales (Amazon, eBay, etc.). 

Be assured that when you purchase your Victron product through an online marketplace such as Amazon or eBay, there is a knowledgeable distributor there to support you. 

Step 1
Read the Product Manual

Your Victron product manual contains:

  • Features
  • Behaviour
  • Specifications
  • Limitations
  • Installation instructions
  • Troubleshooting steps

The product manual is essential reading before installation, or contacting someone for further support. It provides critical information for the safe and reliable use of your Victron equipment.

The product manual for your Victron Energy product can be found in the Downloads section.

Please take the time to review it before seeking further support.

Step 2
Perform a system check

Please be aware that a Victron Energy product is always part of a bigger system.

When performing a system check, pay attention to the following:

  • Are the batteries old, broken or empty?
  • Are there any faulty or loose fuses, cables or isolator switches?
  • Is the AC load too high or is there a short-circuit?
  • Is the grid or generator bad?
  • Are the generator settings correct?
  • Does the system suit the product?
  • Is the system configured correctly?

Please read Victron’s Wiring Unlimited reference guide and confirm that the systems electrical wiring is suitable.

Step 3
Contact your distributor

Contact the company you bought the product from. Product and technical support, as well as warranty claims can be requested from them.

Distributors are trained to provide the first line of support and can assist you with your issue.

This also applies when you bought your product through a webshop; contact the webshop you bought the product from to resolve your issue. In case the webshop is a platform like Ebay or Amazon, contact the distributor that sold you the equipment through the platform. Victron Energy does not sell directly via Amazon, Ebay or similar platforms. A trained distributor is always involved.

When you contact them, have the following information ready:

  • Where and when did you purchase?
  • What are the other system components?
  • What have you already tried?
  • Pictures of the installation.
  • Describe the exact steps to re-create the problem and the behaviour you are seeing.

Find your distributor using the Dealer Finder.

If you have your product serial number but are not sure who your distributor is please click here

Step 4: 
Ask the community

The Victron Community is a place for end-user customers, developers, installers, distributors, Victron managers and other support staff.

It is a searchable knowledge base of questions and answers.

Answers are provided by the whole community, and users are encouraged to participate, support each other, and learn from others.

Victron Energy Limited Warranty Policy